The contractor’s truck just pulled away. The new kitchen looks stunning. The basement suite is ready for tenants. But as you walk through the house, you see it: a fine white film covering the new countertops. Dust on the upstairs TV. A gritty feeling on the new floors.
You grab the Dyson. You fill the canister three times. And the dust is still there.
Standard house cleaning cannot remove renovation dust. In fact, standard vacuums make it worse by blowing the finest particles back into the air. Alpine Pure Shine Clean provides professional post renovation cleaning in Calgary using commercial HEPA air scrubbers and surface-specific protocols that protect your new finishes and make your home livable again.
What Makes Alpine Pure Shine Clean’s Post-Renovation Cleaning Different in Calgary
Most cleaning companies send a regular house cleaner with a mop and a standard vacuum. That approach fails on three fronts: it doesn’t capture airborne silica, it risks scratching new floors, and it ignores the HVAC system.
Alpine Pure Shine Clean approaches post-renovation cleaning as environmental remediation.
HEPA Air Scrubbing Is Standard. We deploy commercial air scrubbers that cycle the room’s air through HEPA filters 4 to 6 times per hour. This captures the respirable silica dust that hangs in the air for days after a renovation. You breathe clean air the same day we finish.
We Understand New Flooring. Luxury vinyl plank (LVP) scratches if you drag a gritty mop across it. Engineered hardwood hazes if cleaned with the wrong pH cleaner. We use microfiber flat mops and pH-neutral cleaners appropriate for your specific flooring material. We don’t use the same mop water for the whole house.
We Inspect the HVAC. We remove vent covers and vacuum inside the duct openings. We check the furnace filter. If the filter is caked with drywall dust, we recommend immediate replacement to prevent motor burnout. This is a $25 fix that saves a $1,200 furnace repair.
Post-Reno Warranty. If you find a layer of settled dust on a horizontal surface within 72 hours of our clean, we return and re-clean that area. Renovation dust is persistent. We stand behind our remediation process.
How Alpine Pure Shine Clean Handles Post-Renovation Cleaning — The Full Process
Post-renovation cleaning is a three-phase process. Skipping any phase leaves dust behind.
Phase 1: Rough Clean and Debris Removal.
We arrive with HEPA vacuums and remove all loose construction debris: drywall chunks, wood splinters, electrical wire clippings, and protective floor coverings. This is the “contractor left a mess” phase. We bag and remove all debris from the site.
Phase 2: HEPA Air Scrubbing and Tactical Dusting.
This is where we differ from every other cleaner in Calgary. We set up air scrubbers and begin the top-down dusting process. We start at the ceiling—light fixtures, smoke detectors, crown molding—and work down to the floors. We wipe every slat of every blind. We clean inside every cabinet and closet. We remove HVAC vent covers and vacuum the duct openings. This phase removes 95% of the visible and invisible dust load.
Phase 3: Final Detailing and Floor Care.
Only after the airborne dust is captured do we clean the floors. We vacuum all flooring with sealed HEPA backpack vacuums. Hard surfaces are damp-mopped with microfiber and a cleaner appropriate for the material. We do a final wipe-down of all horizontal surfaces, including baseboards, window sills, and door frames. We leave the air scrubber running when we depart to continue filtering any residual dust kicked up during our exit.
If you want to understand why this level of detail matters for your health, read our guide on the hidden dangers of post-renovation dust .
How We Protect Your New Floors During Post-Renovation Cleaning
This is the question Calgary homeowners should ask but rarely do: “How will you clean my new floors without damaging them?”
Renovation dust is abrasive. It is essentially microscopic glass shards. Walking on a dusty floor grinds that grit into the finish. Mopping with a dirty mop scratches the surface.
Here is how we protect specific flooring types common in Calgary renovations:
| Flooring Type | Our Cleaning Protocol | Why It Matters |
|---|---|---|
| Luxury Vinyl Plank (LVP/LVT) | Dry HEPA vacuum first. Damp microfiber mop with pH-neutral cleaner. No steam mops. No harsh degreasers. | Steam warps LVP edges. Harsh chemicals strip the wear layer. |
| Engineered Hardwood | Dry HEPA vacuum. Lightly dampened microfiber mop with hardwood-specific cleaner. Never wet mop. | Water penetrates seams and causes cupping. |
| Site-Finished Hardwood | Dry HEPA vacuum only. Buff with dry microfiber if needed. Wait 7-10 days after finish cure before damp cleaning. | Fresh polyurethane needs time to fully harden. |
| Tile and Grout | HEPA vacuum grout lines. Damp mop with tile-safe cleaner. No acidic cleaners on new grout. | Acid etches new grout and dulls tile finish. |
| Carpet (New) | HEPA vacuum with beater bar off. Multiple passes in different directions. | Construction dust settles deep in carpet fibers. Standard vacuums leave 30% behind. |
If your contractor left adhesive residue or paint overspray on the floors, we address that during the detailing phase with appropriate solvents that will not damage the underlying finish.
Post Renovation Cleaning Pricing in Calgary — What to Expect
Post-renovation cleaning is priced by project scope, not by the hour. Variables include square footage, extent of dust/debris, and whether the renovation was contained to one area or spread throughout the home.
Typical Price Ranges for Calgary Post-Reno Cleans (2026):
| Scope of Renovation | Approximate Price Range | Typical Duration |
|---|---|---|
| Single Room (Bathroom/Kitchen only) | $300 – $550 | 3 – 5 hours |
| Basement Development (600 – 1,000 sq ft) | $550 – $900 | 5 – 8 hours |
| Main Floor Renovation (1,000 – 1,500 sq ft) | $750 – $1,200 | 6 – 10 hours |
| Whole Home / Infill Build (1,800+ sq ft) | $1,200 – $2,500+ | 1 – 2 days |
These ranges include HEPA air scrubbing, all equipment, debris removal, and final detailing. They assume the renovation is complete and the contractor has removed large materials and tools.
Note for Landlords and Investors: If you are preparing a newly renovated rental for tenants, this service pairs with our move-in cleaning standards. The unit will be spotless and ready for lease signing photos.
The One Question Most Calgary Homeowners Ask Before Booking
“How soon after the contractor leaves can you come?”
We can typically schedule a post-renovation clean within 48 to 72 hours of your call. We understand you want the dust gone immediately. We also know that some projects require a day or two for final paint touch-ups or minor contractor returns. We coordinate with your timeline.
If you need the unit ready for short-term rental guests, our Airbnb turnover cleaning service can maintain that standard after the initial post-reno deep clean.
Areas We Cover — Calgary and Surrounding Communities
Alpine Pure Shine Clean provides post-renovation cleaning throughout Calgary, including:
-
Inner City: Beltline, Mission, Kensington, Inglewood, Bridgeland
-
Northwest: Tuscany, Rocky Ridge, Arbour Lake, Crowfoot
-
Southwest: Aspen Woods, Signal Hill, West Springs, Evergreen
-
Southeast: Mahogany, Auburn Bay, Seton, McKenzie Towne
-
Northeast: Saddleridge, Taradale, Coral Springs
-
Infill areas: Altadore, Bankview, Killarney, Richmond, Capitol Hill
We also service Airdrie for post-renovation cleaning in Airdrie with the same HEPA equipment and protocols.
Questions Calgary Homeowners Ask About Post-Renovation Cleaning
Do I need to be home during the cleaning?
No. Most clients provide access via lockbox or key with the contractor. We coordinate entry and exit. You return to a clean home.
How long does the dust take to settle after you leave?
With HEPA air scrubbing running during the clean, airborne dust is captured before it settles. You should not experience noticeable dust settling after we leave. If you do, our 72-hour warranty covers a return visit.
Will you clean my windows inside and out?
Interior windows and tracks are included. Exterior windows are a separate service and are generally not part of post-renovation cleaning unless specifically quoted. Most post-reno exterior window cleaning is handled by the builder or a specialized window company.
What’s the difference between this and a standard move-out clean?
A standard move-out cleaning addresses normal household dirt and grime. Post-renovation cleaning addresses construction particulate, debris, and airborne silica. The equipment (HEPA scrubbers) and the time required are significantly different. Using a move-out clean for a post-reno home results in dust remaining in the HVAC and scratching new floors.
Ready to Breathe Clean Air in Your Newly Renovated Home?
Your renovation is complete. Don’t let the dust linger for weeks. A 10-minute call gets you a firm quote and a spot on our schedule.
Get a free estimate for post-renovation cleaning in Calgary or call Alpine Pure Shine Clean at 403-918-7070.
